Beta 1742A Manual do Utilizador descarregar pdf (Página 424)

100

101

Using the Electronic CAM Feature

GFK-1742A Chapter 16 Using the Electronic CAM Feature 16-37

Figure 16-26. CAM Example VersaPro Screens

Step 10: Set up Hardware Configuration in VersaPro

Once a successful syntax check is completed for the local logic and motion programs, we need to

set up the hardware configuration that will allow the example program to be downloaded to the

DSM314 module. The sequence of steps in this example is not typical for most installations. Most

users will first set up their hardware configuration and then generate the programming statements.

However, the example is aimed at illustrating the CAM feature. Therefore, the order is reversed to

better illustrate the link between hardware configuration and the CAM block name in the DSM314

hardware configuration. The next step in our example is to start the hardware configuration. There

are multiple ways to do this. Two methods are presented here (consult VersaPro documentation for

additional details). To perform these steps either (1) access the View selection from the main menu

and then select Hardware Configuration or (2) click the Hardware Configuration toolbar icon. This

will launch the Hardware configuration tool. The default hardware configuration screens are for

the VersaMax product. Therefore, the first operation we need to perform is to select the Series 90-

30. To perform this action, select File from the main menu, Convert T

o from the File menu, and

Series 90-30 from the Convert To menu, as shown in Figure 16-27.

1 2 ... 419 420 421 422 423 424 425 426 427 428 429 ... 519 520

Comentários a estes Manuais

Sem comentários

Beta 1742A Manual do Utilizador Página 424

Comentários a estes Manuais

Manuais e produtos relacionados com Ferramentas elétricas Beta 1742A