Beta 1742A Manual do Utilizador descarregar pdf (Página 298)

100

101

Introduction to Local Logic Programming

GFK-1742A Chapter 10 Introduction to Local Logic Programming 10-35

Figure 10-36. Hardware Configuration 90-30 rack DSM314 Selection

This operation will add the DSM314 to the rack and bring up the DSM314 configuration screens.

This will allow the user to customize the DSM314 to their particular application. The reader

should reference chapter 4 for details concerning the DSM314 configuration settings. For the

example, we are going to change the Logic program name and “Local Logic Mode:” These fields

are contained on the “Settings” tab. In the field “Local Logic Mode”, we want to set it to Enabled.

To do this, double click the field, and a dialog box will be displayed. Select Enable and click OK.

In the field “Local Logic Block Name:”, we want to type in the name of our example program. Our

example program is named “LLExample”. Thus, we type “LLExample” into this field.

Note: This method of linking the DSM314 to a Local Logic program was chosen to allow the user

to easily specify multiple DSM314s that all use the same Local Logic program. In our example,

we only have one DSM314. However, if we had multiple DSM314 that all need to run the same

Local Logic program we would simply indicate that in the configuration for the specific DSM314

that needed to execute this program. This allows the programmer to have one Local Logic source

file for multiple DSM314’s. The reader should also note this does not preclude DSM314’s from

executing different programs.

The resulting Hardware Configuration screens will be as shown in Figure 10-37.

1 2 ... 293 294 295 296 297 298 299 300 301 302 303 ... 519 520

Comentários a estes Manuais

Sem comentários

Beta 1742A Manual do Utilizador Página 298

Comentários a estes Manuais

Manuais e produtos relacionados com Ferramentas elétricas Beta 1742A